Démontage de l'Archos JukeBox - Anglais
There are several ways to disassemble the Archos Jukeboxes. Here is an
approach where you don't need to bend any metal parts.
You need a Torx 10 screwdriver and a very small (~2mm) philips head
screwdriver.
First, remove the
battery covers and unscrew all 8 visible screws: 2 torx screws on the left
and right sides, and 2 philips head screws on the top and bottom. Then you
simply lift off the plastic top cover.
Use your thumb nails to
compress the thin edge of the rubber while gently pulling the metal plate
over it.
Do the same on the side.
You have now freed one end of
the Archos. Now lift the blue rubber bumbers up from the circuit board on
the other end, and simply slide the Archos out of its back plate.
|